Force Range

1~20 KN

Tester Architecture

Free Stand & Vertical extrusion

Power Input

220V, 50 Hz

Force Deviation

≤ ±1% Full-scale Range

Unit Shift

Kgf, lbf, n, kn, kpa, mpa

Crushing Velocity

1~ 900 mm/min (controllable)

Crushing Velocity Accuracy

≤ ±0.5% Full-scale Range

Crushing Travel

300 mm

Crushing Motion Accuracy

≤ ±1% Full-scale Range

Available Battery Size

W400 × D400 × H300mm

Voltage-Reducing Controlling Method

The pressing plate returns or returns after crushing force continues for a fixed tim if voltage drops into a fixed value.

Crushing Force Controlling Method

The pressing plate returns or return after crushing force continues within pre-set time if pressing force reach set value.

Displacement Control

After paused in a period if the pressing tray down to predesigned position , pressing tray will continue second displacement and pause, by repeating such a working mode till to final displacement and pressing tray return after a period maintaining.

Emergency Button

This crushing tester designed with Emergency stop function

Voltage Resolution

1 mv

Test Terms

Force, Displacement (Deformation), Voltage, one from three projects or all three projects

Crushing Time Maintaining

0~99 Hours 99 Minutes & 99 seconds, time can be controllable to control the deformation and stop if test fulfilled.

Industrial Communication

Computer Control,ensure stability and real-time of remote sampling, with explosion-proof function, all data can be store and print through computer with Excel format.

Driving Method

Servo Motor Driving

Nail Penetration Speed

1 ~ 40 mm/s(Controllable)

Tungsten steel needle

Φ3X100MM10 pieces

Φ6X100MM 10 pieces

Φ4X100MM 10 pieces