5V5A Lithium ion Battery Testing Equipment

+7(495)722-60-73 [email protected] 117292, г.Москва, ул.Кедрова, д.4, корп.1

5V5A Lithium ion Battery Testing Equipment

Application

GSM Pulse, Cyclic Voltammetry, Rate, Statistic capacity, Cycle life, constant current, constant power, constant resistance, constant voltage,voltage Scan (cyclic Voltammetry),Waveform import, Arithmetic Functions,1Khz AC impedance, BTS Series, Channel No., Rack Color, Measuring Range, Net With Reverse-connecting Protection.

The New 9 series battery tester has more bigger testing speed and more higher accuracy.

Technical Specifications

Project index		Parameter index
AC Input Power		220/110V ±10% / 50Hz/60Hz
Resolution		AD: 16 bit; DA: 16 bit
Impedance Input		≥ 500 MΩ
Input Power		250 W
Channel Features		Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure
Channel Control Mode		Independent Control
Voltage	Per Channel Voltage Range	0.7V~5V
	Lowest discharge voltage	0.7V
	Accuracy	± 0.02% of FS
	Stability	±0.005% of FS
Current	Multi Range	Rang1: 0.1uA---150uA ± 30nA
		Rang2: 150uA---5mA ± 1uA
		Rang3: 5mA---150mA ± 30uA
		Rang4: 150mA---5A ± 1mA
	Accuracy	± 0.02% of FS
	Stability	±0.005% of FS
Power	Per Channel Max. Output Power	25W
	Stability	± 0.01% of FS
Time	Current Rise Time	The Current gets to (10%-90%) Hardware Rise Time is 100μs
	Step Time Range	Single Step Time Rang>=10ms
Data Recording	Record Condition	Lower sampling time: >=1ms
		Lower sampling Voltage:>= 1mV
		Lower sampling Current: :>= 100nA
	Record Frequency	1000 Hz
Charge	Charge Mode	Constant Current Charge,Constant Voltage Charge, Constant Current and Constant Voltage Charge,Constant Power Charge
	End Conditon	Voltage,Current,Relative Time,Capacity
Discharge	Discharge Mode	Constant Current Discharge,Constant power Discharge, Constant resistance discharge,
	End Condition	Current,Voltage, Relative Time,Capacity,
Pulse Model	Charge	Constant Current Model; Constant Power Model
	Discharge	Constant Current Model; Constant Power Model
	Min Pulse Width	400μs
	Pulse Number	Single Pulse Step Support 16 different Pulse
	Charge r To Discharge	One Pulse Step Can Support Continuous Charge And Discharge Change
	End Condition	Voltage,Relative Time,
DCR Testing	Support Custom Access Point And Count The DCR
Cycle	Loop Measure Range		1~65535 times
	Max Steps Per Loop		254
	Nested Loop		Nested loop Function,Max Support 3 Layers
Protective Function	Software Protection		Power-down Data Protection
			• Off-line Testing Function
			Setting Protection Condition,Setting Parameter: Low Voltage limit, Upper Voltage limit, Low Current limit, Upper Current limit, Delay Time
	Hardware Protection		Additional Anti-reverse Protection Model
Voltage and Current Testing Sample			4-wire connecting
Noise Density			< 85 dB
Data Management			MYSQL
Communication Means			TCP/IP Protocol
Data Output			EXCEL,TXT
Communication Interface			Ethernet Port
No. Of Channels Per Unit			4