Tap Density Tester With Two Testing Position
SPECIFICATIONS
The tap densityis an important index of powder materials quality. Tap density measurement, refers to a certain amount of powder into a vessel, vibration under certain conditions, until the container volume will no longer reduce, read out the powder volume, and then use the powder weight divided by the volume to get vibration compaction density.
TOB-TDT-JZ-7tap density testeris mainly used for Medicine, chemical industry, building materials, battery, aluminum, zirconium powder, nickel powder, tungsten powder, tin powder, zinc powder, molybdenum powder, magnesium powder, copper powder, metal powder, alloy powder for powder industry.
|
Model |
Tap Density Tester TOB-TDT-JZ-7 |
|
Voltage supply |
AC 110V220V 50HZ/60HZ ±10% |
|
Power |
50 W |
|
Warranty |
One year limited warranty with lifetime support |
|
Technical principle |
Tap density refers to the powder in the container will be filled by the vibrated density under specified conditions |
|
Measure time |
5-60 min/time, can test two samples a time |
|
Vibration frequency |
200 times/min, 250 times/min, 300 times/min, 350 times/min can be set |
|
Oscillation Amplitude |
3 mm ±0.2 mm |
|
Measuring accuracy |
＜ ±1％, when test they drum automatically in a cycle of rotation angle, ensuring the noodle was the level of the state, so as to ensure the accuracy of measurement of the height of the noodle |
|
Sample cylinder |
Three models glass sample cylinder with volume of 25ml, 50ml, 100ml |
|
Dimension (L*W*H) |
400*280*230 mm |
Photo Stream
