Small Planetary Mixer TOB-PXFZH-3L

No.

Contents

Specs.

Note

1

Design capacity: 3.8 liters

Working capacity: 1~3 liters

2

Hood : Cover flange with o-ring in groove;

Register inside or outside hood to accurately locate and fix bowl in place;

Two sight glass viewing ports; One vacuum connection with ball valve and one vacuum gauge.

One solids charging port(chute) Ø40.

3

Mix bowl

Dia. 180×h.150

Mix bowl

With jacket for water/oil at 90psig and 350F

Four wheels on bowl bottom

Two pull handles on bowl side

No discharge valve on bowl bottom

4

Characteristics of

mixing movement

Two low-speed mixing blades and one H-speed

disperser rotate on their own axis as they travel around the mix bowl interior, in order to fully mix two or more materials together well

5-1

Blade type

Standard supply

Quarter-twist blades / Removable

304 St. St.

For spare

5-2

H.-S. Disperser

Ø50 sheared blades on dispersing shaft

304 St. St.

6-1

Power motor 1

for agitating / scraping and planetary

0.75 kw (e.g. 1.0HP)

--380v / 3phase / 50hz

--1500 rpm

6-2

Power motor 2

for H.-S. dispersing

1.1 kw (e.g. 1.5HP)

--380v / 3phase / 50hz

--3000 rpm

7

Reducer : Cycloid pin type

BLY0-i=23 (S. Fa.=1.0)

8-1

Self-agitating speed

0~64 rpm (based on 50 hz)

8-2

Planetary / Scraping speed

0~52 rpm (based on 50 hz)

9-1

Self-dispersing speed

0~5700 rpm (based on 50 hz)

9-2

Linear velocity

0~16 m/s (based on 50 hz)

10

Scraper arm

Removable

304 St. St.+ PTFE

11

Speed control

By frequency inverter (converter) .

12

a. Sealed planetary gearbox.

b. 304 construction: gearbox exterior, hood, scraper arm.

c. Vacuum construction up to -0.098 Mpa, with vacuum separator pot; Vacuum pump 2X-2.

d. O-rings and seals in VQM or Viton (FPM).

e. H.-S. Bearings: FAG from Germany or NSK from Japan.

13

Raising and lowering the bowl

By hydraulic lift by oil designed for 0.6~1.9 MPa

--Double action piston Ø50/32×250, 5 MPa, Total 1 (one) pc.

Power pack by power motor

Stroke: appr. 250 mm

14

Temp. show: A flush-mounted product temperature probe is required in the lower sidewall area of the bowl.

It include a quick-release plug.

15

Spare parts kit: O-rings, scraper, lip seals