SPECIFICATIONS
Width: 40 0mm; Lenght: 300 m; Thickness: 90 um
Layers from outside (Shiny) to inside (Mat) |
Polyamide (JIS Z1714): 0.025 mm (±0.0025 mm) |
Thickness: |
90 μm |
Width |
400 mm |
Length |
300 m |
Surface quality |
Mat finish |
Pinholes |
Subject to the applicable aluminum foil standard |
Impurity |
1 mm or less in diameter |
Fish Eye |
2 mm or less in diameter (clear),1mm or less in diameter (colored) |
Molding Depth |
≥ 5.0 mm |
Electrical Insulating |
Good |
Hot Sealing Coniditon |
180-190°C |
Moisture Vapor / O2 Transmission Rate |
200 ppm / 5 years |
Laminate Strength |
Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
Heat Seal Strength |
More than 22.5N/15mm wide at 200℃ x 0.2Mpa x2 sec by TOB heat sealing |
Solvent Retention |
Less than 5 mg/m2 |
Appearance |
Within the sample of the limit |
Slip Factor |
CPP/CPP less than 1.0 |
Application Notes |
Click the picture below to see the finished polymer Li-Ion battery made by heated sealer |
PACKAGE