SPECIFICATIONS
Pouch Cell Case Dimensions |
3.0 Thickness x 20 Width x 25 Length (mm) |
Net Weight |
32 g (50 pcs) |
Layers from outside to inside (material in bracket) |
Polyamid (JIS Z1714): 0.025 mm (±0.0025 mm) Adhesive (Polyester-polyurethane): 0.040 mm (±0.004 mm) Adhesive (Urethane-free Adhesive): 2-3 g/m2 Polypropylene: 0.040 mm (±0.004 mm) |
Thickness: |
113 μm |
Surface Quality |
Matte finish |
Pinholes |
Subject to the applicable aluminum foil standard |
Impurity |
1 mm or less in diameter |
Fish Eye |
2 mm or less in diameter (clear), 1mm or less in diameter(colored) |
Moisture Vapor / O2 Transmission Rate |
200 ppm / 5 years |
Laminate Strength |
Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
Heat Seal Strength |
More than 29.4N/15mm wide at 200℃ x 0.2Mpa x 2 sec by TOB heat sealing equipment |
Solvent Retention |
Less than 5 mg/m2 |
Appearance |
Within the sample of the limit |
Slip Factor |
CPP/CPP less than 1.0 |
Product Display
PACKAGE